Arkansas Micro & Nano Systems Lab

Steve Tung, professor of mechanical engineering

  1. “Nanoscale Flagellar-Motor Based MEMS Biosensor for Explosive Detection,” Jin-Woo Kim, Jeong-Hwan Kim, and Steve Tung, Proceedings of the 3rd Annual IEEE Annual International Conference on Nano/Mico Engineered and Molecular Systems (NEMS), Sanya, Hainan Island, China, January 2008.
  2. “Integrated CNT Sensors in Polymer Microchannel for Gas-Flow Shear-Stress Measurement,” Winnie W. Y. Chow, Wen J. Li1, and Steve C. H. Tung, Proceedings of the 3rd Annual IEEE Annual International Conference on Nano/Mico Engineered and Molecular Systems (NEMS), Sanya, Hainan Island, China, January 2008.
  3. “Aligned Single-Walled Carbon Nanotube FET Biosensor for DNA Detection,” Jason Clendenin, Jin-Woo Kim, and Steve Tung, Proceedings of IEEE NanoMed Conference, Macau, China, August 2007.
  4. “Characterization of Laterally Aligned Carbon Nanotubes Formed by AC Dielectrophoresis,” Husein Rokadia, Steve Tung, and Matt Gordon, Proceedings of IEEE Nano Conference, Hong Kong, China, August 2007.
  5. “A Label-free, Microfluidics and Interdigitated Array Microelectrode Based Impedance Biosensor in Combination with Nanoparticles Immunoseparation for Detection of Escherichia coli O157:H7 in Food Samples,” Madhukar Varshney, Yanbin Li, Balaji Srinivasan and Steve Tung, Sensors and Actuators B: Chemical, Vol. 128, pp. 99-107, 2007.
  6. “A micro shear stress sensor based on laterally aligned carbon nanotubes,” Steve Tung, Husein Rokadia and Wen J. Li, Sensors and Actuators A: Physical, Vol. 133, No. 2, pp. 431-438, 2007.
  7. “An Aligned Carbon Nanotube Biosensor for DNA Detection,” Jason Clendenin, Jin-Woo Kim, and Steve Tung, Proceedings of IEEE NEMS Conference, Bangkok, Thailand, January 2007.
  8. “DNA-Directed Self-Assembly of Microscopic 1-D Carbon Nanotube Wire,” Jin-Woo Kim, Nalinikanth Kotagiri, Russell Deaton, and Steve Tung, Proceedings of IEEE NEMS Conference, Bangkok, Thailand, January 2007.
  9. “A microfluidic filter biochip based chemiluminescence biosensing method for detection of Escherichia coli O157:H7,” Varshney, M., Y. Li, B. Srinivasan, S. Tung, G. Erf, M. F. Slavik, Y. Ying, and W. Fang, Transactions of the American Society of Agricultural and Biological Engineering (ASABE), Vol. 49(6), pp. 2061-2068, 2006.
  10. “Simulation of an Electrical Impedance Based Microfluidic Biosensor for Detection of E. coli cells,” Balaji Srinivasan, Steve Tung, Yanbin Li, and Madhukar Varshney, Proceedings of the COMSOL Users Conference, Boston, 2006.
  11. “Development of Electrically Addressable DNA-Based Carbon Nanotube Wire Bio/Nano Sensors.,” J.-W. Kim, R. Deaton, and S. Tung, International Food Nanotechnology Conference, Orlando, FL, 2006.
  12. “Hybrid flagellar motor/MEMS based TNT detection system,” Jin-Woo Kim and Steve Tung, Proceedings of SPIE, Vol. 6223, Micro (MEMS) and Nanotechnologies for Space Applications, Thomas George, Zhong-Yang Cheng, Editors, 2006.
  13. “Microscale Hybrid Devices Powered by Biological Flagellar Motors,” S. Tung and J. W. Kim, IEEE Transactions on Automation Science and Engineering, Vol. 3(3), pp. 260-263, 2006.
  14. “Chemo-Sensitivity and Reliability of Flagellar Rotary Motor in MEMS Microfluidic Actuation System,” M. Al-Fandi, J. –W. Kim, A. Malshe, S. Tung, J. Jenkins, and R. Pooran, Sensors and Actuators B: Chemical, Vol. 114(1), pp. 229-238, 2006.
  15. “Micromachined Thermal Shear-Stress Sensors for Underwater Applications,” Y. Xu, Q. Lin, G. Lin, R. B. Katragadda, F. Jiang, S. Tung, and Y. –C. Tai, Journal of Microelectromechanical Systems, Vol.14(5), pp. 1023-1030, 2005.
  16. “EAP Actuators for Controlling Space Inflatable Structures,” S. Tung and S. Witherspoon, Journal of Spacecraft and Rockets, Vol. 42(4), pp. 607-612, 2005.
  17. “Interfacing micro-/nano-scale biological and abiologi-cal materials for bio/abio hybrid systems,” J.-W. Kim, S. Tung, and R. Deaton, Proceedings of International Symposium on Nano-scale Devices, Materials, and Biological Systems: Fundamentals and Applications, PV 2004-13, M. Cahay, M., Urquidi-Macdonald, S. Bandyopadhyay, P. Guo, H. Hasegawa, N. Koshida, J.P. Leburton, D.J. Lockwood, S. Seal, and A. Stella (eds), The Elecrochemical Society Proceedings Series, pp. 479-494, Pennington, NJ, 2005.
  18. “Falgellar Motor Based Nitrate/Nitrite Sensor,” J.-W. Kim and S. Tung, 229th American Chemical Society (ACS) National Meet, (Session – Biosensors and Sensors III: Bacteria-Based and Cell-Based Sensors), San Diego, CA, 2005.
  19. “Interfacing of DNA and Carbon Nano-tubes as Building Blocks for the Development of a DNA-Based Nanobiosensor,” N.K. Kotagiri, J.-W. Kim, S. Tung, and R. Deaton, 229th ACS National Meet (Session – Biosensors and Sensors II: Nanosturctures), San Diego, CA, 2005.
  20. “Application of a PDMS Microsieve for the Patterning of Flagellar Motors in a Microfluidic System,” Ryan Pooran, Steve Tung, and Jin-Woo Kim, International Mechanical Engineering Congress and RD&D Expo, IMECE2005-81804, Orlando, Fl, November 5-11, 2005.
  21. “A Microfluidic Filter Chip For Highly Sensitive Chemiluminescence Detection Of E. coli O157:H7,” Balaji Srinivasan, Steve Tung, Madhukar Varshney, Yanbin Li, International Mechanical Engineering Congress and RD&D Expo, IMECE2005-81881, Orlando, Fl, November 5-11, 2005.
  22. “A Novel Method for Determining Pressure Sensitivity of Underwater Shear-Stress Sensor Skins,” Jason Clendenin, Yong Xu, and Steve Tung, International Mechanical Engineering Congress and RD&D Expo, IMECE2005-82123, Orlando, Fl, November 5-11, 2005.
  23. “Development of an Electrically Addressable DNA-Based Aligned Multi-Walled Carbon Nanotube Nanosensor,” Jason Clendenin, Steve Tung, Jin-Woo Kim, Russell Deaton, and Nalini Kotagiri, proceedings of IEEE Nano Conference, Nagoya, Japan, 2005.
  24. “A Microscale Biosensor Based On Integration of Single-Stranded DNAs and Aligned Multi-Walled Carbon Nanotubes,” Jason Clendenin, Nalini Kotagiri, Steve Tung, and Jin-Woo Kim, Proceedings of IEEE Robio Conference, Hong Kong, 2005.
  25. “Patterning of Escherichia Coli Flagellar Motors in a Microfluidic System,” Ryan Pooran, Muhammad Al-Fandi, Steve Tung, and Jin-Woo Kim, International Conference on Bio-Nano-Informatics Fusion, Marina Del Ray, CA, 2005.
  26. “Micromachined Thermal Shear-Stress Sensors for Underwater Applications,” Y. Xu, Q. Lin, G. Lin, R. B. Katragadda, F. Jiang, S. Tung, and Y. –C. Tai, Journal of Microelectromechanical Systems, Vol.14, No. 5, pp. 1023-1030, 2005.
  27. “EAP Actuators for Controlling Space Inflatable Structures,” S. Tung and S. Witherspoon, Journal of Spacecraft and Rockets, Vol. 42, No. 4, pp. 607-612, 2005.
  28. “Bacterial Flagellar Motors as Microfluidic Actuators,” R. Pooran, M. Al-Fandi, S. Tung, J.-W. Kim, N. Kotagi, J.-S. Lee, International Mechanical Engineering Congress and RD&D Expo, IMECE2004-61224, Anaheim, CA, November 13-19, 2004.
  29. “Application of Aligned Carbon Nanotubes in Micro Shear Stress Sensing,” J. Clendenin, H. Rokadia, S. Tung, and K. Ogburia, International Mechanical Engineering Congress and RD&D Expo, IMECE2004-61227, Anaheim, CA, Novermber 13-19, 2004.
  30. “Flagellar Motor Based Micro Hybrid Devices”, S. Tung and J. W. Kim, Invited Paper, 16th IEEE Engineering in Medicine and Biology Society Annual International Conference, San Francisco, September 2004.
  31. “Application of Nature’s Micromachines to Microscale Artificial Devices”, S. Tung, Invited Paper, IEEE International Conference on Robotics and Biomimetics, Shenyang, China, August 2004.
  32. “Development of a Flagellar Motor Based Microfluidic System”, S. Tung, Invited Paper, BioMEMS 2004, Knowledge Foundation 6th Annual International Conference, Boston, MA, 2004.
  33. “Development of a MEMS-Based Control system for Compressible Flow Separation”, S. Tung, B. Maines, F. Jiang, and T. Tsao, Journal of Microelectromechanical Systems, Vol 13, No. 1, pp. 91-99, 2004.
  34. “Underwater Flexible Shear Stress Sensor Skins”, Y. Xu, J. Clendenin, S. Tung, F. Jiang, and Y-C Tai, 2002, Proceedings of IEEE International MEMS-04 Conference, Maastricht, Netherlands, 2004.
  35. “Performance of a Flagellar Motor Based Micro Pump”, R. Pooran, J. Kim, S. Tung, C. Lee and A. Malshe, Best Poster Award, Proceedings of the Annual Meeting of the Institute of Biological Engineering, 2004.
  36. “DNA-Directed Self-Assembly of Single-Walled Carbon Nanotubes through Controlled DNA-Nanotube Interfacing”, J. Kim, S. Tung, R. Deaton, J. Lee, and I. Kodikara, Proceedings of the Annual Meeting of the Institute of Biological Engineering, 2004.
  37. “A Cellular Motor Based Micro Pump- Integration of Flagellar Motors With Micro Channels”, R. Pooran, J.-W. Kim, S. Tung, A. J. Malshe, C. C. Lee, 2003, International Mechanical Engineering Congress and RD&D Expo, IMECE2003-41545, Washington, D.C.
  38. “Design and Analysis of Viscous Micropump Actuated Using Biological Cell Motors “, A. Mohamed, A. P. Malshe, S. Shankar, J. Jenkins, S. Tung, and J.-W. Kim, International Mechanical Engineering Congress and RD&D Expo, IMECE2003-41450, Washington, D.C., 2003.
  39. Jason Clendenin, Matt Gordon, and Steve Tung, “Pressure Sensitivity of a Thermal Shear Stress Sensor”, Proceedings of FEDSM’03 4TH ASME-JSME Joint Fluids Engineering Conference, Honolulu, HI, July 6–11, 2003.
  40. S. Tung, J.W. Kim, A. Malshe, C.C. Lee, and R. Pooran, “A Cellular Motor Driven Microfluidic System”, Transducers ’03 – 12th International Conference on Solid-State Sensors, Actuators and Microsystems, Boston, MA, June 8-12, 2003.
  41. Jason Clendenin, Steve Tung, Nasser Budraa, and John Mai, “Microwave Bonding of Silicon Dies with Thin Metal Films for MEMS Applications”, Proceedings of 53rd Electronic Components and Technology Conference, New Orleans, LA, May 27-30, 2003.
  42. Steve Tung and Scott Witherspoon, “EAP Actuators for Controlling Space Inflatable Structures”, AIAA Paper 2003-1741, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, April 7-10, 2003.
  43. J. W. Kim, A. Malshe, and S. Tung, “Bio-Inspired MEMS: A Novel Microfluidic System Actuated by Biological Cell Motors”, Proceedings of Institute of Biological Engineering (IBE) Annual Meeting, Athens, GA, January 17-19, 2003.
  44. “Fabrication and Testing of a MEMS Low-Flow Meter”, J. Sheppard, J. Clendenin, E. Chiu, and S. Tung, Proceedings of ASME International Mechanical Engineering Congress and Exposition, IMECE2002-33777, New Orleans, LA, 2002.
  45. “A MEMS Flowmeter for Measuring Very Small Flow Rates”, S. Tung, J. Sheppard, and E. Chiu, 2002, International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 3, Nos. 3-4, pp. 273-276.
  46. “Simulation of Thin Metal Film Bonding for MEMS Applications Inside a Microwave Cavity”, J. Clendenin, S. Tung, N. Budraa, and J. Mai, 2002, International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 3, Nos. 3-4, pp. 779-784.
  47. “Fabrication of a Micro Humidity Sensor on a Thin, Flexible Substrate”, B. K. Ng, S. Tung, and S. A. Batzer, 2002, SME paper MS02-184, NAMRC Conference, West Lafayette, IN.
  48. “Design and Fabrication of an EAP Actuator System for Space Inflatable Structures”, S. Witherspoon and S. Tung, 2002, AIAA Paper 2002-1449, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, CO.
  49. “Underwater Shear Stress Sensor”, Y. Xu, Y-C Tai, F. Jiang, Q. Lin, J. Clendenin, and S. Tung, 2002, Proceedings of IEEE International MEMS-02 Conference, January, Las Vegas, NV.
  50. “Design and Fabrication of a Cellular Motor Driven Micro Fluidic System”, J. Young, C. C. Lee, A. J. Malshe, S. Tung, and M. Manson, 2001, Proceedings of 2001 ASME International Mechanical Engineering Congress and Exposition, November, NY.
  51. “A MEMS-Based Flexible Sensor and Actuator System for Space Inflatable Structures”, S. Tung, S. Witherspoon, L. Roe, A. Silano, D. Maynard, and N. Ferraro, 2001, Journal of Smart Structures and Materials, Volume 10, Number 6, 2001.
  52. “A Health-Monitoring System for Gossamer-Type Inflatable Space Structures”, S. Tung, S. Witherspoon, and L. Roe, 2001, Proceedings of the Third Workshop on Structural Health Monitoring, pp. 1125-1133.
  53. “Underwater MEMS Flow Sensors”, S. Tung, F. Jiang, and T. Tsao, 2001, Invited Paper, Proceedings of ASME FEDSM’01, ASME Fluids Engineering Division Summer Meeting, New Orleans, Louisiana, May 29- June 1.
  54. “Development of a MEMS-based Health-Monitoring Module for Space Inflatable Structures”, S. Witherspoon, S. Tung, and L. Roe, 2001, AIAA Gossamer Spacecraft Forum, AIAA-2001-1494, Seattle, WA (April, 2001).
  55. “Transonic Flow Separation Control by MEMS Sensors and Actuators”, S. Tung, B. Maines, F. Jiang, and T. Tsao, 39th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2001-0123, Reno, NV (January, 2001).
  56. “Development of a MEMS-based Active Control System for Flow Separation in the Transonic Regime”, S. Tung, B. Maines, F. Jiang, and T. Tsao, 2000 ASME International Mechanical Engineering Congress and Exposition, Orlando, FL (November, 2000).
  57. “A Micromachined Flow Shear-stress Sensor Based on Thermal Transfer Principles,” C. Liu, J. Huang, Z. Zhu, F. Jiang, S. Tung, Y.C. Tai, and C.M. Ho, Journal of MEMS, Vol. 8, No. 1, pp.90-99 (1999).
  58. “MEMS-Based Active Drag Reduction in Turbulent Boundary Layers”, T. Tsao, F. Jiang, C. Liu, R. Miller, S. Tung, J.-B. Huang, B. Gupta, D. Babcock, C. Lee, Y.-C. Tai, C.-M. Ho, J. Kim, and R. Goodman, Microengineering Aerospace Systems, h. Helvajian editor, page 553, the Aerospace Press (1999).
  59. “Flow control by using high-aspect-ratio, in-plane microactuators”, C.-J. Kim, F. Sherman, S. Tung, C.-M. Ho, J. Woo, Sensors and Actuators A: Physical 73 (1-2), page 169 (1999).
  60. “Measurement of Wall Shear Stress Using Micro Thermal Shear Stress Imaging Chip”, Motoaki Kimura, Atsushi Saima, Steve Tung, James Liu, and Chih-Ming Ho, 5th ASME/JSME Joint Thermal Engieering Conference, San Diego, CA (March 1999).
  61. “Measurements of wall shear stress of a turbulent boundary layer using a micro-shear-stress imaging chip”, Motoaki Kimura, Steve Tung, James Lew, Chih-Ming Ho, Fukang Jiang and Yu-Chong Tai, Fluid Dynamics Research, Vol. 24 (6), pp. 329-342 (1999).
  62. “MEMS for Aerodynamic Control”, Motoaki Kimura, Steve Tung, Chih-Ming Ho, Fukang Jiang, and Yu-Chong Tai, AIAA paper 97-2118, 28th Fluid Dynamic Conference, Snowmass Village, CO (June 1997).
  63. “MEMS – A Technology for Advancements in Aerospace Engineering”, Chih-Ming Ho, Steve Tung, Gwo-Bin Lee, Yu-Chong Tai, Fukang Jiang, and Thomas Tsao, AIAA paper 97-0545, 35th Aerospace Science Meeting and Exhibit, Reno, NV (January 1997).
  64. “A Surface-Micromachined Shear Stress Imager”, Fukang Jiang, Yu-Chong Tai, Bhusan Gupta, Rodney Goodman, Steve Tung, Jin-Biao Huang, Chih-Ming Ho, Proceedings of the 9th International IEEE workshop on MEMS, page 110 (San Diego 1996).
  65. “Analog VLSI System for Active Drag Reduction”, Bhusan Gupta, Rodney Goodman, Fukang Jiang, Yu-Chong Tai, Steve Tung, Chih-Ming Ho, IEEE MICRO, Volume 16, No.5, page 53 (October 1996).
  66. “Interactive Control of Wall Structures by MEMS-based Transducers”, Chih-Ming Ho, Steve Tung, and Yu-Chong Tai, Advances in Turbulence VI, Proceedings of the Sixth European Turbulence Conference, page 413, Lausanne, Switzerland (July 1996).